Authentic Ohm Vape Bape Pod Vape Mod Kit , 1 x 18350 / 18650

More info

Diameter: 22mm

Bottom filling

Bottom airflow adjustable

Powered by 1 x 18650 / 18350 battery (not included)

Battery status and indicator lights

Green: 60%~100% charge (3.85V~4.20V)

Blue: 21~60% charge (3.55~3.85V)

Red: 1%~20% charge (3.30~3.55V)

Protection features:

Dry burn protection: When pressing the fire button, if the e-juice is low or if the coil becomes too dry during your draw, the device will drop the wattage output.

Reverse polarity: The Bape pod will not turn on and will not display any lights.

Short circuit: If it is detected or if the resistance is too high, the light indicator will flash a white light twice in succession. Time out: After firing for 10 seconds, the device will automatically stop and display a cyan light flashes 3 times.

Operation instructions

Power on: Click the fire button rapidly 5 times in succession. The light indicator will flash a white light for 2 seconds for confirmation.

Power off: Click the fire button rapidly 5 times in succession. The light indicator will flash a red light three times for confirmation.

Power selection mode: Press the fire button 3 times. Click the fire button to navigate through the settings.

Dry burn protection on/off: While the device is off, press and hold the fire button for 5 seconds to turn this feature on or off.

By-pass mode: Click the fire button rap-idly 3 times to enter the power selection mode. Then click the fire button until the indicator lights flash white confirming the by-pass mode is on.