 |
| Quantity: | |
|---|---|
| View wholesale prices
| |
| 【弹框标题预留】  Authentic Augvape Flash Kit with Flash 21700 Tube Mod + Intake Sub Ohm Tank - Black, 1 x 18650 / 20700 / 21700, 3.5 / 5.0ml 【弹框提示文本预留】 * 【弹框第一个字段名预留】 * This field is required * 【弹框第二个字段名预留】 * This field is required * invalid email address
| |
58410
Augvape
Enter the battery compartment from the bottom, where you can see a screwed fixed cover with thread. The top of the Flash tube mod is a steel 510 connector, compatible with tanks with a maximum diameter of no more than 26mm. In the control, there is only the fire button. It is conveniently recessed to provide a more comfortable operation. The fire button is surrounded by an LED indicator, which not only informs that the battery charging is about to end but also displays the selected output voltage mode. Provides three output voltage levels: 3.5 / 3.7 / 3.9V.
The Intake sub-ohm tank is in 25mm overall diameter, primarily constructed out of stainless steel material, and comes pre-installed with a large 810 drip tip. It holds a maximum e-juice capacity of 3.5ml with a straight glass tank or 5.0ml with the bubble glass. You can quickly fill this tank using the two large fill ports located at the top. Near the top is a leakproof dual slotted top airflow control ring, which aims to determine the amounts of airflow. The airflow comes through the top inlets and hit the cotton and coil directly via the two pipes. This design prevents leakage and can ensure amazing flavor production. Augvape Flash Kit also comes with intake new innovative mesh coil made of super SS 890L which has more resistance to oxidation and corrosion.
| Brand | Augvape |
| Color | Black |
| Model | Flash |
| Product Type | Starter Kit |
| Material | Aluminum Alloy |
| Compatiable Battery | 18650 / 20700 / 21700 |
| Thread Type | 510 |
| Variable Wattage (VW) | No |
| Telescoping Mod | No |
| Battery Type | Interchangeable |
| Variable Voltage (VV) | No |
| Package | 1 x Flash Tube Mod, 1 x Intake Sub Ohm Tank, 1 x Bubble Glass, 1 x Intake Super SS 890L Coil, 1 x User Manual, 1 x Warranty Card, 1 x Desiccant |
| Weight | 116g (4.09oz) |
| Depth | 26mm (1.02 inch) |
| Height | 142.5mm (5.61 inch) |
| Width | 26mm (1.02 inch) |
More info
510 threading connection
Standby Current: <100uA
Voltage Range: 3.5V (Red Light), 3.7V (Blue Light), 3.9V (Green Light)
Battery: Single 18650 / 20700 / 21700 (Not Included)
Resistance Range: 0.05~3.0ohm
Connector Type: 510 steel, gold-plated spring-loaded pin
Tank Diameter: 25mm
Tank Height: 50.3mm
Tank Capacity: 3.5ml (Straight tube) / 5.0ml (Bubble tube)
Fill: Top Fill System
Airflow: Top to Side Airflow
Drip tip: 810 Drip tip
Aluminum Alloy Chassis Construction
Single button design with LED indicator
Compatible with tanks of no more than 26mm in diameter
Low / high resistance, overheating, short circuit, polarity, over-discharge protection
5.0ml Bubble Glass & 3.5ml Straight Glass
Threaded Top Fill System
Dual Slotted Top Airflow Control Ring
Top-To-Bottom Airflow
Threaded 510 Connection
810 Wide bore Drip Tip
New Super SS 890L Coil
Press-Fit Coil Installation
Enter the battery compartment from the bottom, where you can see a screwed fixed cover with thread. The top of the Flash tube mod is a steel 510 connector, compatible with tanks with a maximum diameter of no more than 26mm. In the control, there is only the fire button. It is conveniently recessed to provide a more comfortable operation. The fire button is surrounded by an LED indicator, which not only informs that the battery charging is about to end but also displays the selected output voltage mode. Provides three output voltage levels: 3.5 / 3.7 / 3.9V.
The Intake sub-ohm tank is in 25mm overall diameter, primarily constructed out of stainless steel material, and comes pre-installed with a large 810 drip tip. It holds a maximum e-juice capacity of 3.5ml with a straight glass tank or 5.0ml with the bubble glass. You can quickly fill this tank using the two large fill ports located at the top. Near the top is a leakproof dual slotted top airflow control ring, which aims to determine the amounts of airflow. The airflow comes through the top inlets and hit the cotton and coil directly via the two pipes. This design prevents leakage and can ensure amazing flavor production. Augvape Flash Kit also comes with intake new innovative mesh coil made of super SS 890L which has more resistance to oxidation and corrosion.
| Brand | Augvape |
| Color | Black |
| Model | Flash |
| Product Type | Starter Kit |
| Material | Aluminum Alloy |
| Compatiable Battery | 18650 / 20700 / 21700 |
| Thread Type | 510 |
| Variable Wattage (VW) | No |
| Telescoping Mod | No |
| Battery Type | Interchangeable |
| Variable Voltage (VV) | No |
| Package | 1 x Flash Tube Mod, 1 x Intake Sub Ohm Tank, 1 x Bubble Glass, 1 x Intake Super SS 890L Coil, 1 x User Manual, 1 x Warranty Card, 1 x Desiccant |
| Weight | 116g (4.09oz) |
| Depth | 26mm (1.02 inch) |
| Height | 142.5mm (5.61 inch) |
| Width | 26mm (1.02 inch) |
More info
510 threading connection
Standby Current: <100uA
Voltage Range: 3.5V (Red Light), 3.7V (Blue Light), 3.9V (Green Light)
Battery: Single 18650 / 20700 / 21700 (Not Included)
Resistance Range: 0.05~3.0ohm
Connector Type: 510 steel, gold-plated spring-loaded pin
Tank Diameter: 25mm
Tank Height: 50.3mm
Tank Capacity: 3.5ml (Straight tube) / 5.0ml (Bubble tube)
Fill: Top Fill System
Airflow: Top to Side Airflow
Drip tip: 810 Drip tip
Aluminum Alloy Chassis Construction
Single button design with LED indicator
Compatible with tanks of no more than 26mm in diameter
Low / high resistance, overheating, short circuit, polarity, over-discharge protection
5.0ml Bubble Glass & 3.5ml Straight Glass
Threaded Top Fill System
Dual Slotted Top Airflow Control Ring
Top-To-Bottom Airflow
Threaded 510 Connection
810 Wide bore Drip Tip
New Super SS 890L Coil
Press-Fit Coil Installation
