 |
| Color: | |
|---|---|
| Quantity: | |
V V & V W Mods Built-In Battery
Features
1. 1800mAh Large Battery Capacity
2. 500-600F accurate temperature control, and memory function
3. Ceramic heating chamber offers quick heating time and Isolated airflow tech offers smooth airflow
4. Changeable mouthpiece, glass, and general mouthpiece for selection
5. Full baked, big vapor dry herb vaporizer vape pen
SPECIFICATION
Size: 60mm*110mm
Battery: Two 18350 built-in batteries 1800mah
Output Temperature: 500F/550F/650F
Output Voltage: 3.4V Blue: 3.6V Purple: 3.8V
Atomizer resistance: 0.5ohm
Standby current: ＜20UA
Charging adaptor: 5V 1A
Charging time: 3 Hours
Each Set Contain:
1pc Hukii Dab Rig
1pc Magnetic Top Cap
1pc Glass Straw Mouthpiece
1pc Glass Stem Intake Pipe
2pcs Ceramic Cup Wax Atomizers
1pc Micro USB Charger
1pc Dab Tool
1pc Cotton Swab
1pc User Manual
1pc Gift Box
How To Use:
Fully charge the device before first use. The power light will flash while charging, and turns solid when
complete.
Adding water: Fill the Hukii base with water, We recommend filling to the halfway point of the beaker base.
But feel free to add less water to achieve your preferred percolation. Do not overfill past the halfway point.
Turn On/ Off: Press the power button 5 times continuously to turn on/off the device. The bottom led will flash 5 times in a white light when it's turned on. And the bottom led will flash 5 times with a red light when it's turned off.
The power button LED lights to indicate different battery levels: four grid-100%, three grid-75%, two grid-50%, one grid25%. The LED will flash while charging. All four-grid LEDs will be lightened on when fully charged.
Three temperatures: Green: 3.4V 500°F; Blue: 3.6V 550°F; Purple: 3.8V 600F
Sesh Mode: Long press the power button for 3 seconds. This will activate the 35 seconds 'sesh mode' (5 seconds preheat time then 30 seconds dabbing time. The bottom Led will flash when preheated. Bottom LED keeps lighting on when it,s ready to use after preheat time)
Temperature Switch: You can press the power button 3 times continuously to switch the temperatures you want in sesh mode. Every time you switch the temperature, the device will restart the 35s sesh mode. The power button flashes 10 times indicating a low battery and needs to be charged. The device will be turned off automatically without use in 5 minutes. After use and when the atomizer has cooled, wipe around the Atomizer to remove unused wax.
To ensure performance and safe vaping, please read the entire manual carefully for instruction.
Features
1. 1800mAh Large Battery Capacity
2. 500-600F accurate temperature control, and memory function
3. Ceramic heating chamber offers quick heating time and Isolated airflow tech offers smooth airflow
4. Changeable mouthpiece, glass, and general mouthpiece for selection
5. Full baked, big vapor dry herb vaporizer vape pen
SPECIFICATION
Size: 60mm*110mm
Battery: Two 18350 built-in batteries 1800mah
Output Temperature: 500F/550F/650F
Output Voltage: 3.4V Blue: 3.6V Purple: 3.8V
Atomizer resistance: 0.5ohm
Standby current: ＜20UA
Charging adaptor: 5V 1A
Charging time: 3 Hours
Each Set Contain:
1pc Hukii Dab Rig
1pc Magnetic Top Cap
1pc Glass Straw Mouthpiece
1pc Glass Stem Intake Pipe
2pcs Ceramic Cup Wax Atomizers
1pc Micro USB Charger
1pc Dab Tool
1pc Cotton Swab
1pc User Manual
1pc Gift Box
How To Use:
Fully charge the device before first use. The power light will flash while charging, and turns solid when
complete.
Adding water: Fill the Hukii base with water, We recommend filling to the halfway point of the beaker base.
But feel free to add less water to achieve your preferred percolation. Do not overfill past the halfway point.
Turn On/ Off: Press the power button 5 times continuously to turn on/off the device. The bottom led will flash 5 times in a white light when it's turned on. And the bottom led will flash 5 times with a red light when it's turned off.
The power button LED lights to indicate different battery levels: four grid-100%, three grid-75%, two grid-50%, one grid25%. The LED will flash while charging. All four-grid LEDs will be lightened on when fully charged.
Three temperatures: Green: 3.4V 500°F; Blue: 3.6V 550°F; Purple: 3.8V 600F
Sesh Mode: Long press the power button for 3 seconds. This will activate the 35 seconds 'sesh mode' (5 seconds preheat time then 30 seconds dabbing time. The bottom Led will flash when preheated. Bottom LED keeps lighting on when it,s ready to use after preheat time)
Temperature Switch: You can press the power button 3 times continuously to switch the temperatures you want in sesh mode. Every time you switch the temperature, the device will restart the 35s sesh mode. The power button flashes 10 times indicating a low battery and needs to be charged. The device will be turned off automatically without use in 5 minutes. After use and when the atomizer has cooled, wipe around the Atomizer to remove unused wax.
To ensure performance and safe vaping, please read the entire manual carefully for instruction.
